There are basic factors which you should consider, whether you are replacing shingles or installing them for the first time on your storage shed roof. The pitch or slant of the roof can affect your movement and the rate at which you work.

While there would be nothing wrong with hiring someone to shingle your roof for you, if you are well read on how to do the work yourself it is something that you can easily accomplish. If you are going to put shingles on your storage shed roof yourself you are going to need to be sure that you are keeping your personal safety in mind. Making sure that the work is done correctly is very important however you do not want to risk your health to do the job. So if you have the proper tools to accomplish the job and have planned ahead with a safety plan you can do a great job shingling your roof.

You will need the following materials in order to properly put shingles on your shed; a hammer, staples, roofing felt, barbed roofing nails, staple gun hammer, utility or trimming knife, straightedge ruler, ridge cap shingles, and asphalt shingles.

You want to make sure that you are sticking within your budget before you begin a large project like this. To accomplish this you are going to need to go out and take measurements of your storage shed roof so you are going to get an excellent idea of how many shingles that you are going to need to get to completely cover the entire roof of the shed. Then you will be able to figure out exactly how much of all the other equipment and supplies that you are going to need to purchase. It would be a real shame and a waste of money if you over bought things and on the other hand it would turn out to be pretty inconvenient if you did not purchase enough supplies to complete your job.

Now when you are ready to get stared you are going to want to unroll all of the roofing felt all across the wooden top of your roof. Make sure to staple the felt down very securely so that it will not move and so that it will also go around the edges and cover the entire roof.

If you are replacing old shingles, first strip off the old roofing material and check the wood for any damage or rot. Ensure that the plywood is still nailed securely to the rafters all around. In this case, instead of the traditional felt paper, use either heavy felt paper or modern water membrane to prevent leaks caused by ice or windblown rain.

You need to make sure that the very first layer of shingles that you are laying down is upside down so that all of the tabs are pointing up. You will then need to cut the first shingle about six inches using a straightedge and a utility knife. You should make sure that the bottom of the shingle should overhang the drip edge of the storage shed by at least 3/8 of an inch. You should use full sized shingles for the rest of the row and nail them down with roofing nails.

While you continue to place your shingles on the roof of your storage shed set them so that the row above the row you are working on is slightly offset. You can create the illusion of overhang by continuing to use this pattern. Once you are done putting all of the shingles on each side of the shed you then attached the roof top shingles from side to side.

When you start with the next row of shingles going up, make sure that each shingle tab on the row above would be nailed down such that it is offset halfway with the seam of the shingle below it. Repeating this pattern gives the effect of an overhang.

Be sure to trim off all of the excess shingles that are overhanging from the sides of your storage shed roof. If you would like to further reinforce your shingles to the shed roof you can use construction adhesive on the shingles. Once you have both sides of your roof shingled you are going to need to attach the roof cap shingles at the peak of the roof from side to side and then finish doing any trimming and cleaning up that needs to be completed.

Having a storage shed can be a great addition to anyone’s property no matter what you plan to store inside it. Of course whatever you do plan to store in your shed you are going to want to make sure that it is kept safe and secure. This is where putting up shingles or replacing old and damaged shingles comes in.